A HIAB lorry arriving on time is only useful if it can enter the site, set up safely and complete the lift without delaying other trades. Effective HIAB transport planning brings those details together before delivery day, reducing avoidable waiting time, unsafe positioning and costly return visits.
For contractors across London and the South of England, the challenge is rarely just moving a load from A to B. Tight entrances, parked vehicles, restricted working hours, weak ground, overhead services and live site traffic can all affect whether a vehicle-mounted crane can carry out the work as planned. A clear plan gives the operator, site manager and delivery team the same understanding of the job.
HIAB transport planning starts before the lorry leaves
The first question is what needs to be lifted, not simply where it needs to go. The weight, dimensions, centre of gravity and lifting points of the load determine the crane capacity required. They also influence how close the HIAB lorry must be able to get to the final position.
A pallet of building materials, a steel beam, a site cabin and an item of plant may all have very different lifting requirements, even where their weights are similar. Long or awkward loads can need more room to manoeuvre and may require tag lines, additional banksmen or a different lifting method. The lift radius matters too. As the crane reaches further from the vehicle, its available lifting capacity reduces.
Accurate load information should be available before booking. Manufacturer data, delivery notes and drawings are useful, but assumptions should not replace confirmed weights. If the load includes loose contents, attachments or packaging, these must be included in the total lifted weight.
The planned delivery location also needs to be clear. A postcode is not a lifting plan. Provide the precise unloading point, the direction of approach, any site restrictions and a contact who can make decisions if conditions change. This allows the transport team to select suitable equipment and identify issues while there is still time to resolve them.
Check the route as carefully as the lift
A HIAB lorry may be capable of the lift but unable to reach the required setting-up area. Route planning considers more than mileage and traffic. Low bridges, weight limits, narrow lanes, sharp turns, low branches and restricted access roads can affect the vehicle and load configuration.
In urban locations, delivery timing can be equally significant. Red routes, controlled parking zones, school streets, bus lanes and time-limited loading bays may require permits or a carefully agreed arrival window. A road closure or traffic management arrangement may be necessary where the crane has to operate from the carriageway.
Site access should be checked from the gate to the lifting position. Consider the entrance width and height, turning space, gradients, internal roads and whether other delivery vehicles will be present. A lorry that can enter a site may still be unable to turn around or reverse safely to the required position.
Photographs, marked-up site plans and a pre-start discussion are often enough to identify straightforward issues. For complex, restricted or higher-risk locations, a site survey is the sensible option. It provides a proper opportunity to measure access, assess ground conditions and agree the safest setup position with the people managing the site.
Ground conditions determine where the crane can work
Vehicle-mounted cranes rely on stable ground beneath the lorry and outriggers. This is one of the most common areas where a delivery plan can fail. Freshly made ground, paving slabs, cellar vaults, drainage runs, service covers, trenches and soft verges may not support the loading imposed by the vehicle.
The site must identify any known underground hazards and confirm the ground is suitable for the proposed setup. Where necessary, spreader pads or outrigger mats can distribute the load, but they are not a cure for unsuitable or unknown ground. If the lorry needs to work close to an excavation, retaining wall or basement, competent advice is required before the lift proceeds.
The working area must also be level enough for safe operation. Excessive slope affects crane stability and may prevent the outriggers being deployed correctly. Wet weather can change conditions quickly, particularly on unmade ground. A plan should allow for reassessment on arrival rather than treating a survey carried out days earlier as a guarantee.
Plan the people, permits and safe working zone
A well-organised HIAB operation needs clear responsibilities. The person managing the site should ensure access is ready, the area is clear and relevant permits or traffic arrangements are in place. The operator needs reliable information about the load, setup area and intended lift. A trained slinger/signaller or appointed person may be required depending on the scope and risk of the operation.
The lift itself should be planned in line with the Lifting Operations and Lifting Equipment Regulations 1998, commonly known as LOLER. The level of planning depends on the complexity and risk of the lift. Routine, simple lifts may be covered by established procedures, while unusual, heavy or restricted lifts need a more detailed lift plan produced by a competent person.
A safe exclusion zone is essential. Nobody should walk beneath a suspended load or enter the crane’s operating area unless their role requires it and communication is controlled. On a busy construction site, this may mean coordinating with deliveries, pedestrians, mobile plant and other trades so that the lifting area remains protected for the duration of the work.
Overhead hazards need particular attention. Power lines, telecoms cables, building projections, scaffolding and trees can all restrict crane movement. Overhead electrical lines must be treated as a serious hazard, with appropriate clearances and controls agreed before work starts. Do not rely on the operator discovering an obstruction once the crane is extended.
Build realistic timing into the delivery
HIAB transport planning works best when the programme allows time for the full operation. Arrival, gate checks, positioning, outrigger deployment, lifting, securing and departure all take time. A narrow booking slot may suit the site diary, but it can create pressure to rush when conditions are not ready.
The site should be prepared before the lorry arrives. This means confirming the unloading area is free of materials, vehicles and people; gates are unlocked; and any banksman, permit holder or site contact is available. It also means checking that the receiving team has the means to move or store the load safely once it is placed.
There is a cost balance to consider. Sending a larger HIAB can provide more lifting capacity and reach, but may create access difficulties or unnecessary hire cost. Choosing a smaller vehicle may save money initially but require repositioning, additional handling or a failed lift if the radius has been underestimated. The right choice depends on the site, load and sequence of work, not on crane capacity alone.
What to provide when requesting a HIAB service
The more complete the information at enquiry stage, the more accurate the recommendation and quotation will be. Provide the collection and delivery addresses, preferred dates and times, the exact load details, lifting points and the intended unloading position. Explain any known access restrictions, parking controls, road occupancy needs, overhead hazards, ground concerns and whether an operative will be available to receive the load.
It also helps to share site photographs and drawings where available. Images taken from the road entrance towards the proposed setup area can reveal obstructions that do not appear on mapping. If the lift is part of a larger programme, explain the order in which items need to be offloaded. This can prevent a critical item being buried behind materials that are not needed until later.
At JBL Group, our friendly, experienced team can provide honest guidance on the HIAB lorry, certified operatives and practical arrangements needed for your project. Early discussion gives everyone more options, particularly where access is restricted or the delivery must fit around a live site.
A successful lift should feel straightforward on the day because the difficult questions were dealt with beforehand. Confirm the load, walk through the route, prepare firm working ground and give the operator room to work. That preparation protects people, keeps the programme moving and turns a delivery into a controlled lifting operation.